Keyboard shortcuts

Press ← or → to navigate between chapters

Press S or / to search in the book

Press ? to show this help

Press Esc to hide this help

Note Trainer

Play → Note Trainer asks which instrument you’re practising. Harmonica opens the Bending Trainer; Guitar, Bass, Flute, and Piano open the Note Trainer described here. Like the Bending Trainer it is practice, not a lesson: there is no song and nothing to fail.

The tabs across the top choose what to drill:

  • Notes: a string and a fret; play that note and hold it.
  • Bends: a fretted note to bend up a half step or a whole step. The status line follows the bend as it rises, so you can hear and see how far you have to go.
  • Harmonics: touch the string lightly over the fret shown, without pressing it down, to sound its natural harmonic.
  • Positions: a note and a string, but no fret. The same pitch exists elsewhere on the neck; the drill is finding it on this string.

The large line says what to play, and the line under it what the trainer hears: the starting note, how far through a bend you are, how many cents sharp or flat you sit, or which other note you played instead. Hold the note in tune until the bar fills and the drill is landed; the next one follows on its own. ‹ Previous and Next › move through the drills yourself, and Listen plays the target on a plucked string.

Single-note exercise tabs keep their own saved progress, separately for guitar, flute and piano: how many drills you’ve landed, and which drill you were on. Coming back, even after closing the game, picks up there.

The full fretboard shows every physical fret, with string 1 at the top, and marks the target on its string. A shaded region suggests the hand’s position. The target dot uses suggested finger numbers (0 for an open string), matching the song-play guide. Positions hides the target fret until Show position is pressed; the next drill hides it again. How close counts as in tune, and how long to hold, come from the same settings as the Bending Trainer’s.

The trainer hears a pitch, not a string, so in Positions it trusts you to play the note on the string it asks for.

Flute

Choose Flute foot joint above the exercise: C foot starts at C4, while B foot includes B3. This is remembered in My instruments and used the next time you open the trainer. Changing it updates both the score and the fingering drawing, keeping your current note when possible.

The flute’s tabs are:

  • Notes: every note from the lowest to C7; play it and hold it.
  • Octaves: finger the lower note, then blow faster to jump to the note above on the very same keys, the way the flute’s second octave sits on its first.
  • Alternate fingerings: a high note on one particular fingering, the standard one or one of its alternates.

The horizontal flute below lights the keys of the fingering to use, with the headjoint at the left. Filled keys are pressed; outlines stay open. Choose a note directly on the score: each note and its name form one clickable target, also reachable with Tab and Enter. The score covers the flute’s full range, including low B when using a B foot joint. Gold marks the selected target; a white outline marks the starting note for an octave drill. Dimmed notes are unavailable in the current exercise. Selecting a note keeps it for repeated attempts; enable Auto-advance to work through the sequence instead. Use Previous and Next to step through alternate fingerings of the same pitch. Listen plays the note in the game’s flute voice. As with the guitar, the trainer hears the pitch, so it trusts you to use the fingering it shows.

Piano

The trainer shows all 88 keys from A0 to C8 at a stable width. Gold marks the target and blue the detected note. The grand staff shows both clefs. Labelled left- and right-hand rectangles suggest five-finger positions, keeping a position until the target requires a move. These are suggestions, not required hand assignments: pitch detection cannot tell which hand played. The drills cover C3–C6. Listen uses the piano voice. On short screens, scroll to reach the keyboard.

Choosing and repeating a guitar target

Use Choose note to pick a pitch, then String / fret to choose one of its available positions. You can also click directly on a string and fret. The controls follow the selected exercise tab, so harmonic positions and bend targets stay playable. Choosing a target switches Auto-advance off: practise it until you choose another. After a successful hold, release the note before trying again. Turn Auto-advance on for the guided sequence. The instructions and score sit together above the full-width fretboard.

In Bends, the note picker chooses the starting pitch. Choose its string and fret, then the half- or whole-step interval. Establish the unbent note briefly before bending; hitting the final pitch alone does not complete the exercise. The live trace rises with pitch and shows a green target band. Overshoot feedback asks you to relax the bend. Release between focused attempts.

Guitar chords

In standard tuning, Chords offers Em, E, Am, A, D, Dm, C and G. Choose a chord from the combobox. Its diagram marks open strings with ○, muted strings with ×, and fretting fingers with 1–4; the full fretboard and staff show the same shape and sounding pitches. Listen plays the whole chord.

Strum the unmuted strings together and hold until the bar fills. Feedback names missing and unexpected pitches. Notes plucked one at a time cannot accumulate into a completed chord. Stop the strings ringing between attempts. The count reports successful strums this session, not mastery. Auto-advance can cycle the chord list; leave it off to repeat one chord.

A polyphonic detector is required. If a monophonic detector is selected, the trainer explains why it cannot assess the chord and offers Use chord detection (NMF). The microphone checks pitches, not which finger or physical string produced them; use the diagram to check your hand and muted strings.

Guitar opens with Auto-advance off and preserves that choice across exercise tabs. Reference playback temporarily pauses assessment so hearing the app’s own reference through the microphone cannot complete an attempt.

Bass

Choose Bass for fretted electric bass. It shares the clickable fretboard and pitch/position selectors with Guitar, with separate saved progress. The tabs offer notes, natural harmonics and alternate string positions; guitar chord shapes and guitar bend drills are not offered.

Markers show fret numbers, with 0 meaning an open string. They do not prescribe a one-finger-per-fret stretch. Use a comfortable hand position and shift as needed. The microphone checks sounding pitch, not the string or finger used.

The score uses bass clef with an octave-below indication: the written notes sit an octave above their sounding pitch. High-register targets use treble clef with the same octave relationship to keep them readable. Note names and audition audio use the sounding pitch. Standard four-, five- and six-string tunings and Drop D are available under Options → My instruments → Bass tuning. This tuning is saved separately from Guitar’s and is used when opening the bass trainer. Use a clean microphone or pickup input and mute unused strings.

Cavaquinho

Cavaquinho shares the clickable fretboard, note selector and position exercises. Its default setup is the Brazilian traditional tuning, with sounding pitches D4–G4–B4–D5 from string 4 to string 1. The preset labels list string 1 first, matching the editor and tablature. Brazilian natural and Violin / mandolin are separate presets under Options → My instruments → Cavaquinho tuning. These names describe particular traditions, not a universal cavaquinho tuning. Other tunings can be authored per string in the Song Editor.

In Brazilian traditional tuning with no capo, Chords offers G, C, D and Em shapes on four strings. The small chord diagram suggests finger numbers; the large fretboard marks fret numbers. Shapes are offered only for the tuning they were defined for. Chord assessment requires a polyphonic detector; the microphone checks pitches, not the fingering, strumming gesture or number of physical strings.

The open-string frequencies follow UFERSA’s acoustics study, table 6. The named tuning variants follow Musixe’s teaching chart.

Clarinet

Choose Clarinet for a Boehm soprano instrument in B♭ or A. The setup combobox also saves your choice for other sessions. This first version supports written E3–C6; altissimo and other key systems are outside its fingering table.

Select a written note directly on the score. Gold marks the target; register exercises also outline the starting note. Register · twelfths practises the lower-to-clarion relationship, with the register key shown separately from the thumb hole. Alternate fingerings includes verified left/right little-finger choices. Press Listen to hear the sounding pitch of the written target.

The contact diagram uses circles for holes and ovals for levers. Gold means cover or press. The microphone checks pitch and timing; it cannot confirm the finger contacts. The basic fingerings follow the Woodwind Fingering Guide’s chalumeau and clarion tables.

In Play, clarinet parts use a horizontal diagram, with a smaller preview of the next different fingering above it. The score and playhead carry the timing; there is no falling-note highway. A short cue shows when to start and how much of the note remains. The trainer retains its upright contact map.